Cup & Mug Block #One designed by Susan Druding

Cup and Mug block #1 paper pieced with numbers


This is a paper foundation pieced block for printing. The block was designed to be 8" by 8" and should have a minimum border of 1/4" seam allowance added around the outer edge. I like to add 1/2" for safety. A second reversed version of the same cup and mug block is under this one so you can make them facing both directions. You need to add your own numbers to the reversed design. Print this out and adjust the size on a copy machine to make the block 8" or the desired size. Feel free to enlarge it to 10" or more, too. Larger is easier to sew if you aren't an experienced paper piecer.

Note that where you see the double lines crossing the paper piecing lines indicates a place where that section of the pattern is cut apart, has a 1/4-1/2" seam allowance added, and is pieced as a unit. Then the units are assembled to make the cup and mug. Sections are A, B & C for the top and bottom sections. 

NOTE - If you are using NETSCAPE browser and these blocks don't quite fit on your page - you can do some adjusting on how this page prints out be deleting top and bottom margin. Click on PageSetup in the FILE menu. You can also delete the Doc. Title, URL and other information to enlarge your page for printing. IE browser doesn't let you set margins to Zero.

Cup and Mug Block #1 Reversed

 

 

 


Go to the Feature article about making these blocks here. 

Go to Cup and Mugs Block #2 Here.

Susan Druding